Panasonic EY6432GQKW 15.6-Volt NiMH 1/2-Inch Cordless Drill/Driver Kit

This model features the longest running 3.5 Amp Ni-Mh batteries in the industry, compared to other 18 Volt tools. The drill/driver weighs only 4.8 pounds but delivers 390 in./lbs. of torque. Max. Torque (in.-lbs.): 390, Volts: 15.6, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Clutch Settings: 18, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 3.5Ah, Battery Included: Yes, (2) 3.5Ah Ni-MH batteries, Charger Included: Yes, 55-minute charger, Case Included: Yes, Tool Weight (lbs.): 4.8

Panasonic EY6432GQKW 15.6-Volt NiMH 1/2-Inch Cordless Drill/Driver Kit Review

Awesome
Shear power. At 390in./lbs. of torque I have been having trouble trying not to shear the heads off of galvanized screws (pre-drilled w/countersink). I've tried both speeds, and all of the clutch settings. This has forced me to drive screws 7/8 of the way home and finish off the deal by hand.

I just finished using this Panasonic to drill 3/4" x 2 3/8" deep holes into a hardwood workbench for bench dogs. The Panasonic maintains constant speed under strain, and while getting hot, it did not overheat. The only reason I would need to stop was to let the fostner bit cool down.

The 3.5 amp NiMH batteries are A+++++. The kit comes with two, so you always have one in the ready. One charge lasts a full day under heavy use. The drill is well balanced and has good ergonomics. The electronic brake stops on a dime. This can't be good for the brushes, but no problems so far. I like the weight of this drill, it is substantial but not too heavy.

The best feature of all - SMALL DRILL BITS WILL NOT SPIN IN THE CHUCK. WOW

I will probably dedicate the 15.6 volt to drilling and buy the Panasonic 12 volt cordless for driving screws. The 15.6 easily overpowers cheaply made screws. Highly recommended!!

Best overall drill
I'd been waiting for years for the perfect overall drill to come into my workshop. I have a brother that sells power tools for a living and he told me about this Panasonic drill that he liked better than all the rest of the pack. The couple of selling points he had was the high torque at ANY SPEED... pull the trigger a bit to turn a screw in slowly even when the going gets tough... and the almost never-ending power supply of 3.5 Amp hours... that's enough power to run a halogen light for 75 minutes! I recently put in an entire subfloor on one charge, the battery just doesn't quit. Note of caution: the chuck has an anti-loosen mechanism that while loosening or tightening makes a pretty loud whine... or ratchteting click when hand turning.. but it pays off.. my bits never loosen while on my milwaukee it happens any time i bump the chuck while loosening screws.

I lucked out in the timing of my purchase.. they just came out with the 3.5AH battery.. it uses squared off battery cells to get more juice in almost the same space as the 3.0AH batteries that have cylindrical battery cells.

I've used the bosch 24V which has 25% more torque.. a monster.. but this drill will put 4" screws into hardwood w/o thinking about it so it has gobbs of torque yet is still a very nice small size.. it fits no problem between two studs to drill holes for wiring and i've used it to bore 2 1/2" holes in cabinets.

I bought the lantern and a spare battery and it's extremely convenient to have a constant portable light source that will last 5-6 hours straight with no dimming whatsoever (light just shuts off when battery is low).

Summary: impossible to beat this drill for overall use... get the new 12V impact if you want light and high power mostly for screw driving... get the 15.6 if you want the best general purpose drill made.

-awr

Buy Now $ Panasonic EY6432GQKW 15.6-Volt NiMH 1/2-Inch Cordless Drill/Driver Kit